When MES is first run on the device you may be prompted to select the machine centre you are working on. At the same time, it may skip this prompt and ask you for the Operator you are working as.
NB: The prompts are based on MES Setup and Application Device Data configuration.
After selecting the operator, you will then be directed to the Production Order Line. The lines presented to you are again based on setup.
NB: You will only see production routing lines for the Machine and Operator you have selected.
From here you need to select the Production Order to work on and select Next again.
The Operator will then be taken to the Output Screen which will essentially act as the Home screen for the Production Order.
